KnowledgeBase
Skip to end of metadata
Go to start of metadata

Problem

The Volume Shadow Copy service, or supporting services, are either not running or have become corrupt. Possible solutions to this issue are:

Solution - Enable Volume Shadow Copy Service

  1. Click Start then Run, type in services.msc and press the Enter key to launch the Windows Service control manager.

  2. Locate the service by name Volume Shadow Copy.


  3. Right click and select Properties. The service dialog is shown.
  4. Ensure Startup Type is set to Manual, click Apply.
  5. If Service status is Stopped, click Start. Otherwise leave at Started state.
  6. Click OK.

 Top of page

 

Solution - Enable COM+ Event System Service
  1. Launch Windows Service control manager as shown above.
  2. Locate the service by name COM+ Event System.
  3. Right click on COM+ Event System and select Properties, the service dialog is shown.

  4. Ensure Startup Type is Automatic, click Apply.
  5. If Service Status is Stopped, click Start. Otherwise, leave at Started state.
  6. Click OK.

Top of page

Solution - Register the Microsoft VSS Components
  1. From the Macrium Reflect main menu, click Other Tasks then Fix VSS Problems
  2. The Fix VSS Problems dialog is shown
  3. Click OK to register the Microsoft VSS Components

 

Top Of Page

 

Related articles