| Note | ||
|---|---|---|
| ||
The first thing you need to do after installing Macrium Reflect is create Rescue Media |
| Include Page | ||||
|---|---|---|---|---|
|
You have the option of restoring to a new system or virtual machine using Macrium ReDeploy to reconfigure your Windows installation for the new hardware.
Windows PE hardware support
The Macrium Rescue Environment needs to include support for your hardware such as USB ports, network interfaces, and in particular for your storage device if for example you use RAID disks. The default Windows PE environment supports a good selection of hardware and you can add support for further devices. When Macrium Reflect creates a rescue CD or USB, it analyses your system hardware and tries to locate drivers for unsupported devices by looking on your system. If it can't find appropriate drivers, Macrium Reflect prompts you to provide drivers. You can provide drivers by finding driver packages on the local hard drive, looking for driver CDs supplied with the system, or downloading drivers from the web. After you provide these additional drivers, Macrium Reflect adds them to the Windows PE environment.
| Info |
|---|
| Note: You cannot add support for booting media because booting takes place before drivers are loaded. For example, if your CD drive is connected via an unsupported SCSI interface card or your boot menu lies on an unsupported RAID array, then the Windows PE cannot boot. Booting using a USB stick is a good workaround in this case as all USB 2/3 interfaces are supported by default. |
CD, DVD and USB rescue media
You can boot your computer into Windows PE from a CD, DVD, USB stick or USB attached external hard disk. For convenience or for automated restores to your system disk, you can add Windows PE to a boot menu that's displayed when your system first starts. Although, do not rely upon this local copy as a rescue mechanism because it could be lost if you suffered hard disk failure or corruption leaving you without a method for rescuing your system.
Macrium Reflect creates custom Windows PE systems for each installation type by downloading the required components from Microsoft.
Further reading:
| Children Display |
|---|