Macrium MultiSite allows multiple Site Manager installations to be monitored and managed from a single online portal. To find out more, visit our website at https://www.macrium.com/multisite
To configure Site Manager for MultiSite integration, the following steps must be followed.
To ensure that no security issues can arise as a result of enabling MultiSite Integration, the following security options must be set in the 'Settings' page under 'Security':
Name | Required Setting |
---|---|
Access Restriction - Allow Access to Site Manager without login | Off - user login must be enabled |
Access Restriction - Network Access | Any computer with network access to the server can access Site Manager |
Connection Settings | HTTPS communication must be enabled |
Connection Settings - Port | Any port may be used |
MultiSite integration of Site Manager must be enabled in the MultiSite section of Settings.
The options available are:
Option | Description |
---|---|
Enable | Toggles Remote Management access on and off |
API Key | Security key required by MultiSite to access Site Manager remotely. If this key is changed, MultiSite access will fail until MultiSite is updated with the new key |
Copy | Copies the API key to the clipboard |
Generate New Key | Generates a new random key. The key is not in effect until 'Save' is pressed |
All communications between MultiSite and Site Manager use RSA 2048 encryption, no unencrypted data is transferred |
The MultiSite connection is based on outgoing traffic from the Site Manager installation.
Server | Protocol | Port | IP Addresses | Purpose |
---|---|---|---|---|
tunnel.msadmin.macrium.com | HTTPS | 443 | 40.84.156.200 13.84.162.176 13.65.241.157 | To establish an initial connection to MultiSite, Site Manager makes an outgoing HTTPS connection to the Macrium servers. |
tunnel.msadmin.macrium.com | SSH | 1004 | 40.84.156.200 13.84.162.176 13.65.241.157 | Site Manager uses an outgoing SSH connection to transfer information to MultiSite. Please note that the port used may change in future releases |
The IP addresses provided may be changed or added to in future releases. We recommend adding any necessary firewall rules by DNS name if possible.