Page tree
Skip to end of metadata
Go to start of metadata

It is possible to clone an entire hard drive or specific partitions on a hard drive. This is useful if you are upgrading to a larger hard drive. With Macrium Reflect you can boot the target disk on the same system after cloning. Cloning your hard drive creates a bootable new hard drive with the state of your computer at the time you undertook the clone. You can clone to a hard drive installed in your computer or to a hard drive installed in a USB Drive Caddy.

Important

Windows cannot boot from a USB-connected drive. This is a restriction imposed by Microsoft. If you clone your system disk to a USB-connected external drive then, to boot your clone,  the physical disk must be removed from the USB caddy and attached internally.

Deleting and re-configuring existing partitions or configuring new partitions is possible with Macrium Reflect, so you don't need to do this prior to cloning.
 

 Show important information about MS Dynamic Volumes...

A Dynamic volume is a logical abstraction of the underlying physical disk and maybe striped or extended over multiple physical disks. Because of this, Dynamic volume file systems are copied not disk partitions.
For more information see
If your source disk contains Dynamic Volume(s) then the background color will change and the link will show 'Copy Dynamic Volumes...':

 

In the Clone Wizard:

  • The partition selection checkboxes and Copy selected partitions link will not be available. Therefore, Dynamic Volumes must be dragged and dropped to the destination. 

  • To copy source Dynamic Volume(s) to destination Dynamic Volume(s) you must prepare the target as Dynamic and format the destination volume(s) in advance of the clone operation.  This can be achieved using the Windows Disk Management Console to convert one or more physical disks to Dynamic.

  • A destination Dynamic Volume cannot be resized so the Cloned partition properties link will not be available if the destination is Dynamic.

  • To convert Dynamic Volume(s) to standard partitions, select an unformatted or an MBR/GPT basic disk as the destination and use Drag and Drop to copy the source volumes. After the clone operation, you can leave the disk as a 'Basic' disk or convert it to Dynamic using the Windows Disk Management Console.
     

See also: Bare metal restore of a Dynamic disk system




Macrium reflect v8 adds additional partition resizing and automation options when cloning and restoring.   

For more complex scenarios where partitions are resized and moved on different disk sizes, please see Restore and Clone Partition Layout 


  1. Select the disk to clone from in the main application window and click Clone this disk...



  2. In the wizard that opens Click Select a disk to clone to...



  3. Select the clone target disk. In this case, there is only one disk available.


  4. If you do not want to modify the order or size of partitions of the clone, click Next. This is the default behavior.

    Alternatively, drag the partitions you want to clone, the red arrow below shows this. 

    Becomes

    In this example, there is 650MB of free space after the copied partition. You can modify the size of each partition to fit the new disk if required.

    You can delete partitions on the target disk by selecting and clicking 'Delete existing partitions'..



  5. To extend the partition to make use of the remaining space on the destination, click Fill Space.

    You can open the more detailed Partition Properties dialogue by selecting a partition on the destination then clicking Layout. Using the Partition Properties dialogue you can:

    1.  Set the partition size precisely using the Partition Size entry box.
    2.  Resize the partition automatically by clicking Maximum size or Minimum size. You can set the partition back to the original size by clicking Revert.



  6. Click OK.

  7. If required, click Advanced Options to change settings for this clone:


    Option_____________Description
    Intelligent sector copyCopy only file system sectors/clusters that are in use. This reduces the time to create the clone as unused file system clusters are not copied.
    Verify File System

    Verifying the file system prior to cloning ensures that there are no file system errors transferred to the clone.

    Please note that this may take several minutes to complete
    Rapid Delta Clone

    Copy only file system differences between the clone source and target. This increases cloning speed dramatically.

     Show more information on RDC...

    As with Rapid Delta Restore (RDR) the concept of RDR has been something that has been thought about for quite some time here at Macrium Software. We wanted to build a clone solution that would effectively and rapidly copy only the differences between the source and target file systems. The advantage of this is obvious, RDC offers similar a performance increase as an Incremental disk image offers over a Full image and enables regular clones to be a viable and fast DR solution.


    How does it work?

    The NTFS file system resident on the clone source is compared with file system on the target disk. The two file systems are first verified that they originated from the same format command and then the target NTFS file system structures are analyzed for differences. All the NTFS file system structures are copied to the target disk and any that do not exist or have been modified on the target disk cause the data records for each NTFS file or object to be copied as well. The result is an 'Incremental' clone applying only file system changes detected between the source and the target.

    Note: RDC works with NTFS file systems only. All other file systems will perform a full clone 
    Note: RDC is not available when shrinking partitions during a clone.

    Enable SSD TRIM

    Enable SSD TRIM on the clone target to optimize the disk.

     Show more information on SSD TRIM...

    This features provides automated SSD optimization resulting enhanced SSD performance and longevity. Writing to an unused block is much quicker than an in-use block as it avoids both the slow erase operation and the read-modify-write cycle. This results an increase of both the lifetime and the performance of the device. It is effective for all windows operating systems, even those that support SSD trim natively as the file system driver can only TRIM blocks on de-allocation; it cannot TRIM blocks written by another process. It is also effective for USB attached SSDs.

    Forensic Sector Copy

    Copy every sector from the source to the target disk partition.

    Please note that this option is only necessary if you want to copy unused file system space and will significantly increase the time to complete the clone.
    ShutdownSet power saving options after a clone task.
    Email SuccessSet recipient, subject, body, and attachments should this clone succeed.
    Email FailureSet recipient, subject, body, and attachments should this clone fail



  8. Click Next.

    The options to Add ScheduleEdit Schedule, or Delete Schedule is displayed.


    Click Add Schedule to optionally schedule your clone



    Make any required changes and click Next
    For more information see Scheduling backups.

  9. Review the settings and click Finish.

  10. Verify the settings in Backup Save Options and if appropriate, click OK

    Note: Saving a backup definition enables you to run your Clone at any time with a single click
    Note: You must save your backup definition if you have created Clone schedules. Your schedules cannot run if this step is missed.

    If you want to run the Clone at this point, select Run this backup now and click OK.


  11. A Warning box appears, if appropriate click Continue.

    Important

    The target disk for the clone operation will be overwritten. This is unrecoverable, so please ensure that the target disk contains no valid data.



  12. The clone operation now starts.

Incompatible Disk Selected

If you receive the error message 'Incompatible Disk Selected' when cloning then please see this article for more information: .Incompatible Disk Selected


Creating a clone video